Generator Parts Manufacturer & Supplier

The POPULACE 803 series water temperature sensor is a variable-resistance engine coolant monitoring component covering seven VDO-compatible part numbers — 803/1/25, 803/1/30, 803/1/1, 803/1/2, 803/1/4, 803/2/7, and 805/3/1 — delivering a direct-fit analog resistance signal to compatible gauges and alarm panels without calibration software or additional processing hardware. Standard threaded installation enables field replacement in under fifteen minutes, making this water temperature sensor a practical choice for diesel generator service teams, marine engineers, and heavy equipment maintenance crews across power generation, marine, construction, agriculture, and mining applications. The sensor body is built to withstand sustained engine heat, vibration, and coolant chemical exposure, and each water temperature sensor ships with a six-month quality warranty covering confirmed manufacturing defects. Available at single-piece MOQ with 3–7 day dispatch via air express, sea freight, or courier, this water temperature sensor supports both emergency one-off repairs and volume distributor stocking orders from the Shiyan, Hubei production facility.

The POPULACE KI-DAVR-50S is a CE-certified 5KW single phase generator AVR using a proportional-integral control algorithm to hold output voltage stable with millisecond-response correction across variable load conditions. Selectable 120V/240V sensing input and a standard Asian genset mounting interface make this generator AVR a direct OEM and replacement fit for most single-phase 5KW frames, serving generator assemblers, parts distributors, and field service technicians across standby, construction, and prime power applications. Built with an impact-resistant industrial-grade plastic housing and self-powered excitation circuit, each unit undergoes pre-dispatch electrical testing before leaving the Xiamen factory. The KI-DAVR series covers 5KW and 10KW output in single-phase and three-phase versions with a 1-year manufacturer warranty, giving distributors complete range coverage and reliable after-sales support from a single direct-supply source.

The POPULACE CH2804 uses a switching power supply with automatic 12V/24V voltage detection and three-stage charging — constant current, constant voltage, and float — covering both 12V and 24V lead-acid starting batteries without manual reconfiguration. Its compact switching design withstands -40°C to +50°C and up to 98% humidity, fitting standard generator control panels and engine rooms where installation space is limited. Available in 4A, 6A, and 10A variants, it serves diesel gensets, marine generators, UPS systems, and agricultural diesel machinery across telecom, data center, healthcare, and industrial sectors. Backed by a one-year warranty, the float maintenance mode keeps batteries at full charge during standby, supporting dependable engine starts in backup power installations.

The Datakom D300-MK3 features a 128×64 graphical LCD with real-time harmonic analysis and waveform display, supporting both J1939 CANBUS for modern electronic engines and MPU input for conventional mechanical setups. Its modular plug-in architecture accepts Ethernet, Wi-Fi, GSM, RS-485, and RS-232 communication modules, with an optional IP65 gasket and display heater for reliable operation down to -40°C. Designed for factories, hospitals, data centers, telecom towers, marine systems, and defense installations, it serves system integrators and generator manufacturers who need a unified AMF/ATS controller. Built-in fuel consumption tracking, load shedding logic, and dual mutual standby with equal aging management reduce total operating costs and extend generator service life.

POPULACE Generator AVR R120 is a self-excited brushless automatic voltage regulator. Compatible replacement for Leroy Somer Series R120. 120V/240V sensing input, 50/60Hz jumper selectable, ±1% voltage regulation. Factory direct supply with 1-year warranty.

POPULACE GAVR-12A automatic voltage regulator is a compact sealed brushless generator AVR for generator sets below 125kW. The GAVR-12A holds output voltage within ±1% regulation, with 4A continuous / 7A intermittent excitation output, 180–260Vac sensing input, internal EMI suppression, 2-second soft start ramp, and under-frequency roll-off protection for both 50Hz and 60Hz systems. Factory direct from Xiamen with 1-year warranty.

The RSK6001 diode is the rectifier service kit for HC7 and LV6 generator alternators, rated at 70A and supplied with a matched varistor for transient spike protection — addressing both the rectification function and the surge failure mode that diode-only kits leave exposed in HC7/LV6 excitation circuits. Pure red copper conductors throughout the RSK6001 diode reduce resistive losses and heat buildup in the rotor assembly compared to mixed-alloy or brass alternatives, while the full-rated 70A chip operates within safe thermal margins under continuous field excitation loads rather than approaching its rated limit under normal working conditions. Every RSK6001 diode unit is quality-inspected before shipment to confirm dimensional and electrical conformance to original HC7/LV6 specifications, and the heavier construction weight compared to standard-grade kits provides a practical incoming quality check for service receiving teams — a direct indicator of full copper content and full-chip specification. Generator repair workshops, fleet maintenance operations, marine alternator service teams, and parts distributors in Africa, the Middle East, Southeast Asia, and South America specify the RSK6001 diode as the standard direct-fit replacement for HC7 and LV6 rotating diode assemblies across standby, prime power, and critical facility generator service programs.